Views:

To set up your Home Network Security Station, do the following:

NOTE:

Connect the Station to the Wi-Fi router that is used by majority of your devices. The Station should not be connected to network equipment, such as switches, hubs, extenders, or repeaters.
  1. Connect the power adapter to the power port of your Station, then plug it to a power outlet.

     

  2. Plug one end of the Ethernet cable to the LAN port of your Station, then plug the other end to one of the LAN ports of your router.

     

    Your Station will now be connected to your router

Need Additional Help?

Contact our Technical Support for further assistance.
Comments (0)
Home Support

How to set up your Home Network Security Station

To set up your Home Network Security Station, do the following:

NOTE:

Connect the Station to the Wi-Fi router that is used by majority of your devices. The Station should not be connected to network equipment, such as switches, hubs, extenders, or repeaters.
  1. Connect the power adapter to the power port of your Station, then plug it to a power outlet.

     

  2. Plug one end of the Ethernet cable to the LAN port of your Station, then plug the other end to one of the LAN ports of your router.

     

    Your Station will now be connected to your router

Need Additional Help?

Contact our Technical Support for further assistance.

Was this helpful?

  • It was very helpful.
  • It was helpful.
  • Just okay.
  • It was not helpful.
  • It wasn't helpful at all.
Messenger Icon
Ask Vanessa

Reach out our Social Media ambassador and she'll answer your question or issue.

Hi there  👋

How can we help today? Click me to start chatting with support.

Close
Trend Micro Support

Our Support Representative will be with you shortly.

Product Image

Trend Micro Support

Usually replies in few minutes

Before we start. Kindly fill up details below

Please see our privacy policy for more information on howwe use your data.